Click one of the four photo catalog tabs below.  Float your cursor over a photo to pause the image and/or bring back the description.

Hail Protective Mode

Traditional Cover Mode

[img src=http://www.hailprotector.com/wp-content/flagallery/product-photos/thumbs/thumbs_hail_protector_logo_non_inflated_rear_photo.jpg]31210Hail Protector Automobile Cover Non-Inflated Mode Rear
Hail Protector includes the same features of traditional car covers with both UV protection and waterproof properties
[img src=http://www.hailprotector.com/wp-content/flagallery/product-photos/thumbs/thumbs_hg-deflated-front-1024x768.jpg]23240Hail Protector Automobile Cover Non-Inflated Mode Front
Hail Protector includes the same features of traditional car covers with both UV protection and waterproof properties
[img src=http://www.hailprotector.com/wp-content/flagallery/product-photos/thumbs/thumbs_hg-deflated-passenger-side-1024x768.jpg]22390Hail Protector Automobile Cover Non-Inflated Mode Left Side
Hail Protector includes the same features of traditional car covers with both UV protection and waterproof properties
[img src=http://www.hailprotector.com/wp-content/flagallery/product-photos/thumbs/thumbs_hg_deflated_drivers_side_1024x755.jpg]21970Hail Protector Automobile Cover Non-Inflated Mode Right Side
Hail Protector includes the same features of traditional car covers with both UV protection and waterproof properties
[img src=http://www.hailprotector.com/wp-content/flagallery/product-photos/thumbs/thumbs_hail_guardian_blower_blanks_installed.jpg]22920
Removable blower assembly enables longer term traditional cover use with the blower blanks
[img src=http://www.hailprotector.com/wp-content/flagallery/product-photos/thumbs/thumbs_hail_guardian_blower_blanks.jpg]22280
Waterproof foam blower blanks

Construction/Operation

[img src=http://www.hailprotector.com/wp-content/flagallery/construction-and-operation/thumbs/thumbs_hailprotector4433.jpg]1090
[img src=http://www.hailprotector.com/wp-content/flagallery/construction-and-operation/thumbs/thumbs_yytuy.jpg]1580
[img src=http://www.hailprotector.com/wp-content/flagallery/construction-and-operation/thumbs/thumbs_remote-control.jpg]61270Remote Control
With our remote control, you can activate your installed Hail Protector from up to 100 feet away!
[img src=http://www.hailprotector.com/wp-content/flagallery/construction-and-operation/thumbs/thumbs_the-hail-protector-cover-storage-bag.jpg]29780Hail Protector Cover Storage Bag
Includes a drawstring at the opening and 2 straps to reduce the size of the packed cover in the trunk
[img src=http://www.hailprotector.com/wp-content/flagallery/construction-and-operation/thumbs/thumbs_elastic-band-wide-view.jpg]77380Elastic Bands
Here's a wider view of the Hail Protector's elastic bands when the unit is in non-inflated mode.
[img src=http://www.hailprotector.com/wp-content/flagallery/construction-and-operation/thumbs/thumbs_elastic-band-close-up.jpg]71070Elastic Band Stitching
Here's a close-up photo of Hail Protector's stitched elastic bands. These bands keep the Hail Protector's fabric close to your vehicle in non-inflated mode and they stretch to allow inflation of the Hail Guardian when it is in hail protection mode.
[img src=http://www.hailprotector.com/wp-content/flagallery/construction-and-operation/thumbs/thumbs_cover-is-mostly-double-stitched.jpg]68820Double Stitching
Hail Protector uses double stitching for added strength!
[img src=http://www.hailprotector.com/wp-content/flagallery/construction-and-operation/thumbs/thumbs_material-close-up_polyester-with-uv-and-weather-treatment.jpg]68000Hail Protector Fabric
The Hail Protector is made of top-grade polypropylene with both UV and weather treatment, giving your vehicle top-notch protection for years to come!
[img src=http://www.hailprotector.com/wp-content/flagallery/construction-and-operation/thumbs/thumbs_angle-view-close-up-rear-car-cover-mode.jpg]68730Blower Cover Extensions
The Hail Protector's four blower covers are at the rear of the unit. The white extensions you see here prevent the uninflated device from clogging the blower motors during inflation.
[img src=http://www.hailprotector.com/wp-content/flagallery/construction-and-operation/thumbs/thumbs_12v-plug.jpg]59650Car Accessory Power
Hail Protector will run for 2.5 hours on Car Accessory Power without depleting the "starting power" of your car battery.
[img src=http://www.hailprotector.com/wp-content/flagallery/construction-and-operation/thumbs/thumbs_110v-power-supply.jpg]59020AC Outlet Power
Hail Protector will run for virtually an unlimited amount of time on AC Outlet Power.
[img src=http://www.hailprotector.com/wp-content/flagallery/construction-and-operation/thumbs/thumbs_aa-battery-pack.jpg]59340Battery Case
Hail Protector may be powered by our battery case, which holds 8 AA Alkaline or Rechargeable Batteries, for up to 1 hour of operation.
[img src=http://www.hailprotector.com/wp-content/flagallery/construction-and-operation/thumbs/thumbs_automotive-grade-power-connection-weather-resistant.jpg]69490Hail Protector's Power Connection
Our automotive grade power connection, disconnected.
[img src=http://www.hailprotector.com/wp-content/flagallery/construction-and-operation/thumbs/thumbs_att00429.jpg]68720Hail Protector's Power Connected
Here's our automotive grade power connection, connected.
[img src=http://www.hailprotector.com/wp-content/flagallery/construction-and-operation/thumbs/thumbs_buckle-connection.jpg]65300Hail Protector Buckle Connection
Two buckles and straps pass easily under your property and connect to the far side of the Hail Protector. Buckling and unbuckling is easy!
[img src=http://www.hailprotector.com/wp-content/flagallery/construction-and-operation/thumbs/thumbs_strap-assembly.jpg]57050Strap Assembly
The strap assembly passes underneath the property to secure Hail Protector in high winds.
[img src=http://www.hailprotector.com/wp-content/flagallery/construction-and-operation/thumbs/thumbs_hg-buckle-assembly-1024x768.jpg]68440Hail Protector's Buckle Assembly Attached
Here you can see where the buckle assembly has been passed under the property and buckled into the far side of the Hail Protector device. In this image, the device is inflated .
[img src=http://www.hailprotector.com/wp-content/flagallery/construction-and-operation/thumbs/thumbs_cinch-wand.jpg]56880Hail Protector Cinch Wand
Our patent pending Cinch Wand enables you to secure the device to your property without having to even put your knee on the ground!
[img src=http://www.hailprotector.com/wp-content/flagallery/construction-and-operation/thumbs/thumbs_8-year-old-proves-lightweight2.jpg]67500Hail Protector is Light Weight!
The Hail Protector is so light that an 8-year-old can carry it!
[img src=http://www.hailprotector.com/wp-content/flagallery/construction-and-operation/thumbs/thumbs_hail_guardian_blower_blanks_installed.jpg]54890Blower Blanks Installed
Hail Protector's blower assembly may be easily removed, and replaced with waterproof foam blower blanks, for longer term use as a simple protector.
[img src=http://www.hailprotector.com/wp-content/flagallery/construction-and-operation/thumbs/thumbs_hail_guardian_blower_blanks.jpg]54140Blower Blanks Un-installed
Photo of Hail Protector waterproof blower blanks uninstalled.

Comments are closed.